Supported Features:
HighPoint Technologies Inc. анонсираха новият си HighPoint HPT372 контролер съвместим с последният ATA133 стандарт.Single chip ATA/ATAPI controller, supports up to 4 ATA/ATAPI devices, easy integration onto mainboard
256 Bytes FIFO per ATA channel
Early interrupt by HPT372 after all the data written into HPT372 FIFO
Provides PCI Power Management 1.1 capability
One PCI function supports two independent ATA channels
PCI Configuration Register can be accessed via normal I/O operation
Supports ATA/ATAPI, PIO Mode 0, 1, 2, 3, 4, DMA Mode 0, 1, 2 , Ultra DMA Mode 0, 1, 2, 3, 4, 5 and up to 133MB/s
Easy Plug-and-Play feature
Supported RAID function (RAID 0, 1, 0+1)
Automatically fine tune to reach the best performance for each ATA/ATAPI device connected
PIO and bus master access concurrently (ATA port accessible during DMA transfer)
Total IDE bus tri-state by software control and supports hot-swap (Low signal Current)
Software available for Windows 95/98, Windows NT 4.0, Windows 2000 and Linux
144-pins LQFP package